Instructions說明:

1.
  1. Determine the number of units needed for your project.
首先決定你所規劃的作品需要多少單位的材料。
2.
  1. Cut the necessary units for your project.
剪下你所規劃的作品所需要的材料單位。
3.
  1. Immerse MorphiJade into 60~70℃ or 140~158°F water for about 2 minutes.(Picture A)
將魔塑彩晶浸入60~70℃的熱水約2分鐘(如圖 A)。
4.
  1. MorphiJade will become soft and is ready to use and to mold according to your need.
魔塑彩晶將變為柔軟,此時已經可以依據你的需求加以造型。
5.
  1. Remove MorphiJade from water by using a spoon or fork. To prevent injury from the hot water, do not use bare hands to take out the product.(Picture B)
使用湯匙或叉子從熱水中取出魔塑彩晶。千萬不能用空手由熱水中提取,以防傷害(如圖 B)。
6.
  1. Once removed from water, MorphiJade will be cool enough to mold by hand, and/or tools.
取出後的魔塑彩晶將因溫度下降,而可用雙手或工具造型。
7.
  1. To shorten cooling time, you can choose to place the finished product in ice water for faster solidifying process. However, the ending result is the same when cool down at room temperature.
為了縮短硬化所需的冷卻時間,你可將完成的作品浸入冰水中,以加快其固化過程。然而,其結果和室溫冷卻是相同的。


p01.jpg

未命名-1.png

 

PACKAGING 包裝

 1.
  1. Starter: 4 pcs of 30x50x3.2mm
                  1 pc of 50x70x3.2mm

入門款:30 x 50 x 3.2 mm 4片裝
               50 x 70 x 3.2 mm 1片裝

 2.
  1. Regular: 17 pcs of 30x50x3.2mm

家庭款:30 x 50 x 3.2 mm 17片裝

 3.
  1. Professional: 1 pc of 210x297x3.2mm(A4)

專業款:210 x 297 x 3.2 mm (A4 尺寸) 1片裝

 4.
  1. Professional: 1 pc of 450x600x3.2mm

專業款:450 x 600 x 3.2 mm 1片裝

 

 

FEATURE 特性

(1)
  1. MORPHIJADE is easy and convenient for flat surface projects and designs.

    易於平面設計的作品或中空的作品。
(2)

MORPHIJADE is easy to trim.

易於剪裁。
(3)

Standardization square-type scale, easy to grasp the accuracy of usage and toned.

標準化正方型刻度,容易掌控使用量與調色的準確度。
(4)

Different specifications of the softening temperature (eg for indoor or outdoor)

依據室內或室外,有不同規格的軟化溫度。
(5)

Different specifications of the hardening time based on your requirement.

依據需求,有不同的硬化時間。
(6)

Different specifications of hardness based on your demand.

依據需求,有不同規格的硬度。